Surface modification for nano‐lignocellulose fiber through vapor‐phase‐assisted surface polymerization

This study addresses the inherent issues surrounding surface modification methods of nanofibers and proposes an environmentally friendly and less toxic strategy for the surface modification of hydrophilic nanofiber. From the continuation of our previous work, which discussed the easy production of nanofiber (average size: 127 nm) from oil palm mesocarp fiber (OPMF), in this work, the surface of nanofibers (M‐IL‐OPMF) were modified through vapor‐phase‐assisted surface polymerization (VASP) to improve the affinity of interface between the polymer grafted M‐IL‐OPMF and non‐polar matrix. VASP of ε‐caprolactone was successfully proceeded from the [M‐IL‐OPMF] at 70 °C for 24 h and 72 h, and compositions were estimated to be 35.7% fiber/64.3% polymer and 27.8% fiber/72.2% polymer. To confirm the grafting of PCL, size‐exclusion chromatography (SEC) and Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetry (TG), and dispersibility test in hydrophobic solvent were carried out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2575–2580     

Microwave-Assisted Method for Synthesis of 1,3-Disubstituted Pyrroles

1,3-Disubstituted pyrroles were prepared by a microwave-assisted reaction of pyrrolidine and aldehydes in toluene as well as in solvent-free conditions. Reactions were completed in a few minutes in the solvent-free condition but a long time (up to 30 min) was necessary to complete reactions in toluene. Yields of products depended considerably on the aldehyde used.     

Accelerating the calculations of binary detour phase method by integrating both CUDA and Matlab programming for GPU's parallel computations

The availability of state of art GPGPU cards can play a promising role in accelerating the calculations of computer generated holograms (CGH) where one of the main problems of generating such holograms is the need for massive amount of calculations. Both CUDA and Matlab can be used alone to fulfill this purpose but using both at the same time gives a number of benefits. This paper is dedicated to present a performance study of applying Fermi-Architecture CUDA-enabled GPGPU card for speeding up the calculations of binary detour phase holograms using both Matlab and CUDA programming.     

Computational analysis of glycolytic reaction in open spatial reactor

We consider the computational analysis of processes within the spatially-distributed model simulating the glycolytic reaction taking place in the one-side fed open chemical reactor. The main point of the simulation is the decomposition of the reaction–diffusion system into unidirectional reaction in a bulk supplied by feedback terms stated as boundary conditions on the lower boundary of the reactor, i.e. the unique plane where an exchange with an outer medium is possible within the real experimental situation. Analysis of the curvature of the reagents distribution curves proves kinematic character of the observed lateral waves corresponding to the picture of experimentally observed glycolytic traveling waves. At the same time, their origin relates to diffusion of the reagents in a vertical cross-section of the reactor. Study of the solutions for the concerned reaction–diffusion model in the case of stochastically different diffusion coefficients reveals the Turing structures.     

一类正交空间填充设计的构造

空间填充设计在计算机试验中应用十分广泛,当拟合回归模型时,正交的空间填充设计保证了因子效应估计的独立性.基于广义正交设计,文章给出了构造二阶正交拉丁超立方体设计和列正交设计的方法,新构造的设计不仅满足任意两列之间相互正交,还能保证每一列与任一列元素平方组成的列以及任两列元素相乘组成的列都正交.当某些正交的空间填充设计不存在时,具有较小相关系数的近似正交设计可作为替代设计使用.设计构造的灵活性为计算机试验在实践中的广泛应用提供了必要的支持.     

A variational inequality formulation of equilibrium models for end-of-life products with nonlinear constraints

Variational inequality theory facilitates the formulation of equilibrium problems in economic networks. Examples of successful applications include models of supply chains, financial networks, transportation networks, and electricity networks. Previous economic network equilibrium models that were formulated as variational inequalities only included linear constraints; in this case the equivalence between equilibrium problems and variational inequality problems is achieved with a standard procedure because of the linearity of the constraints. However, in reality, often nonlinear constraints can be observed in the context of economic networks. In this paper, we first highlight with an application from the context of reverse logistics why the introduction of nonlinear constraints is beneficial. We then show mathematical conditions, including a constraint qualification and convexity of the feasible set, which allow us to characterize the economic problem by using a variational inequality formulation. Then, we provide numerical examples that highlight the applicability of the model to real-world problems. The numerical examples provide specific insights related to the role of collection targets in achieving sustainability goals.     

REVIEW ON OPTIMIZATION OF ASTEROID CAPTURE ORBITS

小行星捕获对研究行星起源、地球生命来源、防御小行星撞击地球和开采行星矿产资源具有重要的意义。由于现有的推进器能力不足,小行星捕获任务中优化小行星捕获所需要的速度增量是任务成败的关键。本文分别从利用引力辅助轨道优化、连续小推力轨迹优化、小行星捕获任务轨道优化设计及小行星临时捕获等4 个方向介绍小行星捕获轨道优化方面国内外研究进展及现状。基于对上述研究现状的分析,尝试展望小行星捕获轨道优化研究的未来发展趋势。     

Microwave‐assisted extraction in combination with HPLC‐UV for quantitative analysis of six bioactive oxoisoaporphine alkaloids in Menispermum dauricum DC

A novel and reliable method based on microwave‐assisted extraction (MAE) followed by HPLC‐UV was developed and validated for the simultaneous quantification of six pharmacologically important oxoisoaporphine alkaloids in the total plants of Menispermum dauricum DC. The optimal MAE extraction condition was performed at 60°C for 11 min with ethanol–water (70:30, v/v) as the extracting solvent, and the solvent to solid ratio was 20:1. Chromatographic separation was achieved on a reversed‐phase YMC C₁₈ column (250 × 4.6 mm, i.d., 5 µm) with a gradient mobile phase consisting of A (1% aqueous formic acid) and B (acetonitrile containing 1% formic acid) at a flow rate of 1.5 mL/min. The detection wavelength was set at 422 nm. Excellent linearity over the investigated concentration ranges was observed with values of r >0.999 for all analytes. The method developed was validated with acceptable sensitivity, intra‐ and inter‐day precision and extraction recoveries. It was successfully applied to the determination of six alkaloids in Menispermum dauricum DC from different sources and different parts of Menispermum dauricum DC. The results obtained indicated that the method is suitable for the quality control of Menispermum dauricum DC. Copyright © 2015 John Wiley & Sons, Ltd.     

Simultaneous removal of Cu2+ and Cr3+ ions from aqueous solution based on Complexation with Eriochrome cyanine‐R and derivative spectrophotometric method

TiO₂ nanoparticles deposited on activated carbon (TiO₂–NP–AC) was prepared and characterized by XRD and SEM analysis. Subsequently, simultaneous ultrasound‐assisted adsorption of Cu²⁺ and Cr³⁺ ions onto TiO₂‐NPs‐AC after complexation via eriochrome cyanine R (ECR) has been investigated with UV–Vis and FAA spectrophotometer. Spectra overlapping of the ECR‐Cu and ECR‐Cr complex was resolve by derivative spectrophotometric technique. The effects of various parameters such as initial Cu²⁺ (A) and Cr³⁺ (B) ions concentrations, TiO₂‐NPs‐AC mass (C), sonication time (D) and pH (E) on the removal percentage were investigated and optimized by central composite design (CCD). The optimize conditions were set as: 4.21 min, 0.019 mg, 20.02 and 13.22 mg L^?1 and 6.63 for sonication time, TiO₂–NP–AC mass, initial Cr³⁺ and Cu²⁺ ions concentration and pH, respectively. The experimental equilibrium data fitting to Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models show that the Langmuir model is a good and suitable model for evaluation and the actual behavior of adsorption process and maximum adsorption capacity of 105.26 and 93.46 mg g^?1 were obtained for Cu²⁺ and Cr³⁺ ions, respectively. Kinetic evaluation of experimental data showed that the adsorption processes followed well pseudo second order and intraparticle diffusion models.     

Fast computation of generic bivariate resultants

We prove that the resultant of two “sufficiently generic” bivariate polynomials over a finite field can be computed in quasi-linear expected time, using a randomized algorithm of Las Vegas type. A similar complexity bound is proved for the computation of the lexicographical Gröbner basis for the ideal generated by the two polynomials.